Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
- Body details
Forward bumper
Damages to result of failures
Face-to-face part of the car
Cowl
Wings
Lateral laths
Doors
Dismantling of doors
Mirror of the external review
Luggage carrier cover
Back bumper
Sliding/demountable roof
Check of a corrosion-resistant coating of the bottom
Procleaning of apertures for a water drain
+ Salon
Search of malfunctions
Technical characteristics
|
Luggage carrier cover
Dismantle
|
- Open a cover.
- Remove a triangular warning sign.
- Unscrew an arm of a warning sign.
- Unscrew facing of a cover of a luggage carrier.
- Disconnect штекерный a socket of wires to electric knots in a cover of a luggage carrier and stretch a socket through an input in metal.
- Disconnect a hose of the central lock.
- Cast away lock collars on газонаполненных shock-absorbers on the right and at the left and remove them. After that it is possible to wring out газонаполненные shock-absorbers from spherical heads.
- Keeping a cover together, unscrew on the right and at the left two screws on a loop.
- Uncover a loop.
- It is possible to unscrew in addition the hinge from a body.
|
|
Adjustment of a cover of a luggage carrier
|
Loops of a cover of a luggage carrier: 1 and 2 – screws a luggage carrier loop/cover; 3 and 4 – screws a loop/body. |
|
Position of a plate of the lock with a bolt (2) behind at the bottom of a luggage carrier can be adjusted after easing of both screws (3). The lock plate becomes accessible facing after dismantle (1) edges of a luggage carrier. |
|
- It is necessary, that a crack between a cover of a luggage carrier and left, and also the right detail of a body was one width (about 3 mm). At back glass the crack between it and a cover on the right and at the left too should be identical width.
- Adjustment is carried out after easing of screws of a loop/cover of a luggage carrier. Besides, the cover should be in one plane with lateral details of a body. It can be adjusted after easing of screws of a loop / a lateral wall.
- If the luggage carrier cover knocks or is badly closed, it is possible to adjust the persistent shock-absorber on the right and at the left below on a cover:
- Loosen the the fixing screw also shift upwards or downwards and again tighten. Persistent shock-absorbers are established correctly in the event that they at the closed cover adjoin without pressure.
- Check up landing and closing of a cover of a luggage carrier if it is necessary, spend additional юстировку plates of the lock of a luggage carrier.
|
|
Dismantle of the lock of a luggage carrier
|
- Open a cover.
- Remove a precautionary triangle.
- Unscrew an arm of a precautionary triangle.
- Unscrew facing of a cover of a luggage carrier.
- Pusher dismantle: cast away a lock collar on an operating bar to a key wedge and remove a bar.
- Disconnect a socket of the central lock.
- Disconnect an air hose of the central lock.
- Unscrew two nuts, remove inside the press button with a lock drum.
- Dismantle of a key wedge: remove an operating bar (cast away sideways a lock collar).
- Unscrew two шестигранные nuts on a key wedge, take out a key wedge downwards.
|
|
|
|