Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
- Salon
Control panel
The average console
Seats
Search of malfunctions
Technical characteristics
|
The average console
Dismantle of a back part of the console
|
Dismantle of a back part of the console, 1st stage: take out a fixing hairpin (marksman) below on the handle (1) manual brakes, remove forward from the lever of a lay brake the handle and facing (2). |
|
Dismantle of a back part of the console, 2nd stage: after ashtray dismantle the nut (1) is behind weakened. |
|
Dismantle of a back part of the console, 3rd stage: wring out a protective cap (2) behind on a forward part of the console (arrow), under it unscrew the screw (1). |
|
- Extend the lever of a lay brake.
- Screw-driver wring out below on the handle of a lay brake a small fixing hairpin and take out.
- Take out the handle of a lay brake forward.
- Remove facing of the lever of a lay brake forward and upwards.
- Open an ashtray and take out.
- Loosen the a nut under it.
- On the right and at the left wring out protective caps near to a seam of a back/forward part of the console, unscrew under them screws.
- Lower a back part of the console on its forward part (wring out downwards).
- Pull upwards a manual brake and the console remove forward over the lever of a manual brake.
- Highly having lifted the console, take out from clips a socket of a wire of diagnostics near to an ashtray.
|
|
Dismantle of a forward part of the console
|
Dismantle of a forward part of the console, 1st stage: in assembly mine of a radio receiver the screws designated here in figures from 1 to 4 should be weakened. |
|
Dismantle of a forward part of the console, 2nd stage: in cars without climatic installation remove regulators of heating/ventilation and unscrew screws (arrows). |
|
Dismantle of a forward part of the console, 3rd stage: screws from 1 to 4 should be unscrewed after removal of the decorative panel of the average console. |
|
Dismantle of a forward part of the console, 4th stage: wring out a protective cap of the average console (2) ahead in feet of the driver, unscrew under it a nut (1). |
|
- Disconnect a wire of weight of the accumulator.
- Dismantle a back part of the console in gathering.
- Take out from grooves back edge of a frame of a cuff of the lever-selector and shift upwards a cuff.
- At an automatic transmission: unscrew the lever-selector button, remove facing.
- Dismantle a radio receiver (the head Tools and devices).
- Loosen the in assembly mine of a radio receiver two screws.
- Remove all three regulators of heating/ventilation.
- Unscrew under buttons of a regulator two screws.
- In cars with completely automated climatic installation it is excessive work.
- Remove the decorative panel of the average console (switches are not dismantled).
- Under the decorative panel unscrew other four screws.
- Wring out small facings in feet of the driver, under them unscrew a nut and remove the console over a cut hairpin.
- Remove the console back.
- At installation track that directing on the right ahead on the average console has entered into a collar on a frame.
|
|
Dismantle of facing of a steering column
The information on dismantle of facing of a steering column you will find Switches in section.
Facing dismantle in feet of the driver
Under facing of a rack of a door in feet of the driver there are arms штекерных sockets (the Electrotechnical equipment see also the head).
Dismantle
|
- Open a door, remove a rubber lath.
- Loosen the two screws.
- Remove facing.
|
|
|
|