Audi А4
+ Running gear
+ Regular servicing
- Engines
Capacity steps
Engine signs
Technology of the engine, maintenance service and repair
Greasing system
Exhaust ventilation картера
The visual control of the engine
Engine service life
Nominal and maximum frequency of turns
Restriction of number of turns
Measurement of pressure of compression
The help at malfunctions
Hydropushers
Works on a gear belt
The help at malfunction
Installation and dismantle of a head of the block of cylinders
Installation and engine dismantle
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics
|
Installation and engine dismantle
|
In a workshop the engine is dismantled by means of such elevating device. For these purposes the head of the block of cylinders has fixing eyes to which chains or cables, certainly, can be attached. Before it will be taken out, the face-to-face part of the car should be dismantled and are disconnected all штекерные and screw connections. |
|
On the dismantled engine the so-called intercepting device (1) which is combined with an arm (2) transmissions is visible. The sense of it consists in propping up a transmission which at the dismantled engine differently could fail downwards. Certainly, the same effect can achieve if to prop up it from below. |
The description of dismantle of engines of all models would leave for limits of possibilities of this management. Here some essential moments, concerning this theme are resulted only:
|
- The engine rises upwards without a transmission. For this purpose to you it is necessary полиспаст which you could suspend reliably at sufficient height. Preliminary loaded assistant is useful also.
- Before the beginning of direct dismantle remove all stirring details of the car: the bottom facing of the engine, the case of the air filter, and also a face-to-face part of the car in gathering. If is, dismantle вязкостный the fan.
- As in Audi A4 the set of electric wires and vacuum hoses you should designate first of all all these wires and hoses is established that then correctly to connect them in a proper place.
- Before a detachment of the accumulator you should be convinced that have a code against radio receiver theft.
- Disconnect the accumulator only at the switched off ignition, differently it is possible to damage management blocks.
- Before a definitive detachment of the engine it is necessary to prop up a transmission or to raise it together with even established engine a little. For these purposes in a workshop the special tool which rests against fixing edges of wings is used.
- The engine has an eye for suspension into which the elevating device can be inserted. Track reliability of fastening.
|
|
The inhaling moments
Details
|
The inhaling moment in Nanometer
|
All bolts and nuts |
М6 М8 М10 М12
|
10 20 45 60
|
Reception pipe on an exhaust knee |
М8
|
25
|
The compressor of climatic installation at an arm |
М8
|
25
|
The converter of a twisting moment at a capture guard |
М8
|
35
|
Engine support in a fastening place to the engine |
М10
|
45
|
Vjazkostnoe coupling at an arm |
М10
|
45
|
Сервонасос at an arm |
М8
|
25
|
The generator at a suspension bracket |
М8
|
35
|
|
|