Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
- Ignition system
That provides ignition
When there is an ignition of a toplivno-air mix?
Different systems of ignition
So there is an ignition spark
Executive office
System brain
The signals arriving in the block of management
Detonation adjustment
Be cautious in circulation with ignition
Works on ignition system
Search of malfunctions in ignition
The ignition distributor
High voltage knot
Replacement of spark plugs
Correct choice of spark plugs
Check of the moment of ignition
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics
Check of the moment of ignition
In systems of ignition Audi without the distributor it is impossible to regulate the ignition moment. At distributive ignition with the engine of 74 kw ignition adjustment are checked by a workshop within the limits of checkup. For this purpose, first of all, the computer is interrogated. Then in a substantive provision the block of management is resulted by ignition/injection. It also becomes by means of the device for computer reading.
Most to correct ignition installation it is not meaningful, if in the beginning there was no считана an information in the computer. As our blocks of management "self-trained" they can carry out corresponding adjustment of ignition if one signal of the gauge, for example, has dropped out. Before something will be changed in ignition installation, it is necessary to be convinced in the beginning that any defect in system has not deformed ignition installation.
The same concerns so-called basic installation by means of the device for reading of computer V.A.G 1551. While the management block is not resulted in a condition of the basic installation, correct adjustment cannot be carried out. Therefore the most suitable partner in this work is workshop Audi. The workshop makes check on following parametres: control size: 0–12 ; adjusting size 03 .
