Audi A4

Since 1994 of release

Repair and car operation



Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
- Brakes
   Independent work on brake system
   So the brake system works
   Check of brakes
   Brake liquid
   Check of level of a brake liquid
   Check of brake system on tightness and presence of damages
   Replacement of a brake liquid
   Disk brakes
   Measurement of a thickness of overlays of forward disk brakes
   Check of a condition of brake disks
   Replacement of overlays of disk brakes
   Back disk brakes
   Measurement of overlays of back disk brakes
   Manual brake
   Check of idling of the lever of a manual brake
   The main brake cylinder
   The brake amplifier
   Check of the brake amplifier
   Works on hydraulics of brake system
   Prorolling of brake system
   The help at malfunctions
   ABS and EDS
   What does ABS?
   Function of separate knots
   Electronic system of distribution of brake effort (EBV)
   Infringements in system ABS work
   Electronic blocking of differential (EDS)
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics



Electronic system of distribution of brake effort (EBV)

Audi A4 does without a traditional regulator of brake effort for back wheels. Instead of mechanical or hydraulic management of pressure hydraulic module ABS for electronic distribution of brake effort (Elektronische Bremskraft-Verteilung) is used. It is carried out by the block of management ABS.

The block of management by means of the gauge of number of turns supervises delay of each back wheel and compares sizes of a forward and back axis. If at braking distinction between number of turns of forward and back wheels too big pressure upon brakes of back wheels decreases by means of electromagnetic valves in the hydraulic module. In such a way excessive braking of a back axis is not supposed, Audi remains in a track.