Audi A4

Since 1994 of release

Repair and car operation

Audi А4
+ Running gear
- Regular servicing
   Installation in a starting position of the indicator of periodicity of maintenance service
   Crossing of dates of maintenance service
   The plan of maintenance service for the motorist
   Diagnostics in workshop Audi
   Diagnostics of an executive element
   Interrogation of a database of malfunctions
   Diagnostics as the help to the fan
   Car identification
   Safety precautions on a workplace
   Greasing of all details
   Check of level of oil
   The oil expense
   Choice of oil with the correct specification
   Viscosity of oil
   Correctly picked up engine oil for Audi
   Replacement of engine oil and the oil filter
   Check of level of a liquid in system сервоуправления
   Check of level of oil in a mechanical transmission
   Check of level of oil in a drive of the back bridge
   The control of level ATF in an automatic transmission
   Check of level of oil in the main transfer of an automatic transmission
   Replacement ATF
   Greasing of draughts, hinges and locks
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics


At the left: the onboard jack (2) can be established only under the labels (1) which have been squeezed out in metal in a fold of the bottom of the car. It concerns both a lobby, and to a back part.

On the right: such подставной the tripod too is tagged only under (1). Anyway it should stand up for an external fold of a body or on a longeron under a body. Not to damage a body, it is recommended to enclose between them a plate (2).

Jacks exist any cost and for the different purposes. Here different types are described:

Regular (onboard) jack: always enclose a small plate that the jack basis could not be pressed into a ground.
Jack параллелограммного type: only the steady model in this case is recommended. Such jack costs on the car which body in lifting points is already weakened. Such jack can be established a bit further to the body centre.

Hydraulic плунжерный the lift: before purchase check up height of its lifting. Too short model will not lift a wheel on the necessary height from the earth. And too high lift simply you will not thrust under the car.

Garage (mobile) jack: for the motorist is better the short, small model which is not taking many places will approach.