Audi А4
+ Running gear
- Regular servicing
Installation in a starting position of the indicator of periodicity of maintenance service
Crossing of dates of maintenance service
The plan of maintenance service for the motorist
Diagnostics in workshop Audi
Diagnostics of an executive element
Interrogation of a database of malfunctions
Diagnostics as the help to the fan
Car identification
Safety precautions on a workplace
Jacks
Greasing of all details
Check of level of oil
The oil expense
Choice of oil with the correct specification
Viscosity of oil
Correctly picked up engine oil for Audi
Replacement of engine oil and the oil filter
Check of level of a liquid in system сервоуправления
Check of level of oil in a mechanical transmission
Check of level of oil in a drive of the back bridge
The control of level ATF in an automatic transmission
Check of level of oil in the main transfer of an automatic transmission
Replacement ATF
Greasing of draughts, hinges and locks
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics
Safety precautions on a workplace
Work place
If care of a motor vehicle becomes a hobby, it is necessary to create necessary conditions for this purpose.
Always fix the car!
The jack, as it is known, serves to raise the car only. It does not provide a sufficient support at works under the lifted car. Even at the biggest haste do not refuse professionally executed fixing of the car lifted by a jack!Propping up the car, do not forget to enclose under wheels stones or wooden wedges that it has not swept at lifting.
Than to fix the car?
Hollow building blocks are the cheapest possibility of fixing of the car. They should not be damp or have cracks, differently can slide off or break at loading. Between the block and a body it is necessary to put a board for uniform distribution of loading to all block. The hollow block needs to be established apertures vertically on an equal, strong surface (concrete or asphalt).
Podstavnye tripods are ideal addition to a garage jack. At all other jacks, and also at the garage jack established sideways, there is a danger that the tripod substituted from another side will simply move aside. Therefore is better to establish a tripod so that one his foot has been turned outside, and two others – in a direction of the middle of the car. Basic surfaces of a tripod should not be too small!
Ramps represent possibility of the fastest lifting of the car. The car costs absolutely reliably.
