Audi A4

Since 1994 of release

Repair and car operation



Audi А4
+ Running gear
- Regular servicing
   Installation in a starting position of the indicator of periodicity of maintenance service
   Crossing of dates of maintenance service
   The plan of maintenance service for the motorist
   Diagnostics in workshop Audi
   Diagnostics of an executive element
   Interrogation of a database of malfunctions
   Diagnostics as the help to the fan
   Car identification
   Safety precautions on a workplace
   Jacks
   Greasing of all details
   Check of level of oil
   The oil expense
   Choice of oil with the correct specification
   Viscosity of oil
   Correctly picked up engine oil for Audi
   Replacement of engine oil and the oil filter
   Check of level of a liquid in system сервоуправления
   Check of level of oil in a mechanical transmission
   Check of level of oil in a drive of the back bridge
   The control of level ATF in an automatic transmission
   Check of level of oil in the main transfer of an automatic transmission
   Replacement ATF
   Greasing of draughts, hinges and locks
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
+ Suspension bracket of wheels and steering
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics










Check of level of a liquid in system сервоуправления

Liquid level сервоуправления (2) should be measured in a tank at the working engine. For this purpose unscrew a cover (1) tanks and look on probe. By arrows labels are shown.

The constant control

 PERFORMANCE ORDER

  1. For check of level of a liquid start the engine idling.
  2. Put a wheel directly.
  3. Unscrew a cover (cautiously, a spring), wipe probe a pure napkin, without screwing up, put a cover on a jellied aperture. Again uncover and look on probeе, what level of a liquid. It should be between marks.
  4. At доливании level is reported to reach a mark "MOVE".
  5. Basically liquid loss testifies to leak in hydraulic system. Therefore in that case not simply fill in hydraulic oil, and in the beginning find a leak place!