Audi A4

Since 1994 of release

Repair and car operation



Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and backlash in heads of cross-section steering draught
   Check of dustproof caps of hinges of an axis
   Check люфта a steering wheel
   Check клинового a belt
   Check of level of oil
   Check of a backlash of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and a steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Shock-absorber replacement behind
   Steering
   Works on a steering
   Tightness check сервоуправления
   Poliklinovoj belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Pump dismantle сервоуправления
   Filling and system prorolling сервоуправления
   Safety pillow
   Safety instructions
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics



Adjustment of the steering mechanism

 PERFORMANCE ORDER

  1. Put wheels directly.
  2. Let your assistant повращает to the left and to the right a steering wheel about average position – is heard knock or a clicking.
  3. Simultaneously cautiously and slowly turn an adjusting bolt to the right (screwing up) until clicks in the car will disappear.
  4. Spend a trial trip: the steering should not have a heavy course in one of positions or especially be got jammed. Otherwise replace the steering mechanism.

Replacement of a dustproof cuff of the steering mechanism

It is possible to replace a cuff of the steering mechanism at the established steering mechanism.

 PERFORMANCE ORDER

  1. Dismantle a head of cross-section steering draught.
  2. Press through шланговые collars.
  3. Remove an old dustproof cuff.
  4. Pull a new rubber ring of round section and a new dustproof cuff.
  5. Put new шланговые collars.
  6. Fix cross-section steering draught.