Audi A4

Since 1994 of release

Repair and car operation



Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and backlash in heads of cross-section steering draught
   Check of dustproof caps of hinges of an axis
   Check люфта a steering wheel
   Check клинового a belt
   Check of level of oil
   Check of a backlash of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and a steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Shock-absorber replacement behind
   Steering
   Works on a steering
   Tightness check сервоуправления
   Poliklinovoj belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Pump dismantle сервоуправления
   Filling and system prorolling сервоуправления
   Safety pillow
   Safety instructions
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics



Check люфта a steering wheel

 PERFORMANCE ORDER

  1. Lower the left lateral window. Rise near to the car.
  2. Put a hand through a window and twist a steering wheel a little to the left and to the right.
  3. Whether the left forward wheel from rectilinear position turns simultaneously? Pay attention to a rim as the elastic tyre can "absorb" a turn part before will begin movement.

The reasons люфта a steering

Люфт in steering transfer can be caused:

  • Gear рейкой the steering mechanism. Here arisen люфт can be eliminated by adjustment;
  • The beaten out hinges of cross-section steering draughts from an outer side or with internal at the steering mechanism;
  • Defective hinges of a connecting element of the partitioned safe steering column;
  • The weakened screw connection between a steering column and the steering mechanism.