Audi A4

Since 1994 of release

Repair and car operation



Audi А4
+ Running gear
+ Regular servicing
+ Engines
+ Turbo-supercharging
+ Exhaust system
+ Cooling system
+ Fuel tank and the fuel pump
+ The air filter and channels всасывания
+ Injection system
+ Coupling
+ Transmission and the main transfer
- Suspension bracket of wheels and steering
   Running gear
   Check of cuffs of the steering mechanism
   Check of dustproof caps and backlash in heads of cross-section steering draught
   Check of dustproof caps of hinges of an axis
   Check люфта a steering wheel
   Check клинового a belt
   Check of level of oil
   Check of a backlash of the wheel bearing
   Shock-absorbers
   Check of shock-absorbers
   The help at malfunctions
   Adjustment of wheels
   Measurement of adjustment of wheels
   The help at malfunctions
   Independent works on a running gear and a steering
   Dismantling of a suspension bracket of forward wheels
   Works with the back bridge
   Shock-absorber replacement behind
   Steering
   Works on a steering
   Tightness check сервоуправления
   Poliklinovoj belt
   The help at malfunctions
   Adjustment of the steering mechanism
   Pump dismantle сервоуправления
   Filling and system prorolling сервоуправления
   Safety pillow
   Safety instructions
+ Brakes
+ Wheels and tyres
+ The electrotechnical equipment
+ Ignition system
+ Illumination
+ The alarm equipment
+ Tools and devices
+ Heating and ventilation
+ Body details
+ Salon
Search of malfunctions
Technical characteristics



Check of dustproof caps and backlash in heads of cross-section steering draught

Sharnirnye heads on the external end of cross-section steering draughts consist of steel spherical heads which greasings with a small amount are placed in synthetic covers and are not subject to maintenance service. Protection of hinges against a dust and dampness is provided with the rubber caps which condition needs to be checked more often:

 PERFORMANCE ORDER

  1. Check up all surface of dustproof cuffs on presence of cracks.
  2. Heads of cross-section steering draughts with the torn cuffs are considered defective – replace them.
  3. In hinges you can check up backlash presence on the raised car by rocking of a wheel concerning its vertical axis or by rocking of the most cross-section steering draught.
  4. Other possibility: let your assistant in the car standing on the earth will twist a steering wheel to the left and to the right, and you feel a hand, whether there is in the hinge a backlash.
  5. At once replace cross-section steering draughts with a backlash!
  6. By the same way it is checked, whether there is a backlash in internal hinges of cross-section steering draught which are screwed together directly with gear рейкой a steering.
  7. If the internal hinge has defect, unfortunately, it is necessary to change all cross-section steering draught.